Understanding Change Orders and How to Avoid Surprises

Building While Giving mascot

If you’ve ever asked what is a change order and why it seems to show up partway through a remodel, here’s the scenario: you’ve been planning your Denver remodel for months. The design is locked in, the contract is signed, and your contractor has broken ground. Then it happens, a conversation that starts with “We found something unexpected…” and ends with a number that wasn’t in your original budget.

Change orders are one of the most misunderstood and anxiety-inducing parts of any remodeling project. For many homeowners, they feel like a surprise attack on the budget. But the truth is that change orders don’t have to be surprises at all.

At Building While Giving, we believe your home improvement journey should feel empowering, not stressful. When you understand what change orders are, why they happen, and how to minimize them, you take back control of your project, and your peace of mind.

Let’s break down what is a change order and how to avoid surprises.

Table of Contents

 

Homeowner and contractor reviewing paperwork together, illustrating what is a change order in a Denver remodelWhat Is a Change Order? A Quick Definition

A change order is a formal, written amendment to your original construction contract. It documents any modification to the original scope of work, whether that’s adding something new, removing something that was planned, or adjusting materials and finishes.

Change orders typically cover:

• Changes to materials or fixtures (e.g., upgrading from standard tile to custom stone)

• Additions to the original scope (e.g., adding recessed lighting that wasn’t in the plan)

• Work required due to unforeseen conditions (e.g., discovering rotted subfloor once old flooring is removed)

• Adjustments driven by code compliance or permit requirements

• Homeowner-requested modifications during construction

Every legitimate change order should include a clear description of the change, its cost impact (or credit), and the effect on the project timeline. Before any change order work begins, you, the homeowner, should sign off on it.

Pro Tip: Never allow a contractor to proceed with out-of-scope work without a signed change order in hand. Verbal approvals create confusion and disputes. Always get it in writing.

Why Do Change Orders Happen? The Real Reasons

Change orders get a bad reputation, often because they appear to come out of nowhere. But most have very explainable origins. Understanding the “why” helps you plan smarter from the start.

Unforeseen Site Conditions

Older Denver homes, especially those built before 1980, can hide a lot behind walls, under floors, and above ceilings. Water damage, outdated wiring, asbestos-containing materials, inadequate insulation, or structural issues only become visible once work begins. No contractor can see through walls during a bid walkthrough.

Homeowner-Driven Changes

This is more common than most homeowners realize. You’re three weeks into your kitchen remodel when you walk through and think, “What if we extended the island by two feet?” or “Can we add a pot-filler above the range?” These are understandable impulses, it’s your home, and seeing it take shape sparks new ideas. But mid-project changes almost always cost more than they would have in the planning phase.

Design Gaps or Incomplete Plans

When a project scope isn’t fully defined upfront, or when allowance amounts are set too low, change orders fill in the gaps. If your contract includes a $3,000 tile allowance but you fall in love with a $9,000 option, the difference comes through as a change order.

Code and Permit Requirements

Local building codes evolve, and permit inspectors may require updates that weren’t anticipated. In Denver and surrounding municipalities like Littleton, Englewood, or Highlands Ranch, code requirements can vary and sometimes trigger additional work, especially in electrical panels, egress windows, or HVAC systems.

Material Substitutions

Supply chain disruptions are still very real in today’s construction environment. If a specified product is discontinued or backordered, a substitution may be required, and that substitution may cost more (or less) than originally planned.

The True Cost of Change Orders: More Than Just Money

Change orders cost more than the dollar amount on the paper. Here’s what they can actually affect:

• Timeline: Additional work means additional days—sometimes weeks, depending on material lead times or subcontractor scheduling.

• Budget stress: Unplanned costs can derail your contingency fund if you haven’t set one aside.

• Decision fatigue: Mid-project changes force rushed decisions, which can lead to regret.

• Contractor relationships: Frequent scope changes can strain trust and communication if not handled respectfully and transparently.

None of this is meant to scare you, it’s just meant to prepare you. When you understand the full picture, then you’ll be able to plan smarter.

7 Proven Strategies to Minimize Change Orders on Your Denver Remodel

You can’t eliminate every change order, but you can dramatically reduce them.

Here’s how:

Invest in Thorough Pre-Construction Planning

The single most effective way to avoid change orders is to make every decision before construction begins. Choose your finishes, fixtures, appliances, tile, cabinetry, and hardware before the first nail is driven. Decisions made in a showroom are far cheaper than decisions made on a job site.

Demand a Detailed, Itemized Contract

Vague contracts breed change orders. Before signing, ensure your contract specifies exact materials (brand, model, color), allowance amounts that reflect realistic pricing, a clear scope of work with defined inclusions and exclusions, and a payment schedule tied to milestones. If your contractor can’t provide this level of detail, that’s a red flag.

Set Realistic Allowances

Low allowances are a hidden trap. A $2,500 tile allowance sounds fine until you visit a tile showroom and realize quality options in Denver start at $8–$12 per square foot installed. Ask your contractor to set allowances based on the quality range you actually want, not the lowest possible number.

Budget a Contingency from Day One

Industry standard for renovation contingency is 10–20% of the total project budget. For older Denver homes (pre-1970), lean toward 20%. This fund is protection for the unexpected. Think of it the way you think of an emergency fund for your household finances.

Ask About Known Risks Before Signing

A reputable contractor will proactively flag potential risks before work begins. Ask directly: “Based on what you’ve seen in this home, what are the most likely unknowns that could trigger a change order?” The answer will tell you a lot about both the risk profile of your project and the integrity of your contractor.

Stick to Your Plan (Unless It Truly Matters)

Once construction begins, resist the urge to change course unless there’s a genuinely compelling reason. That said, if something truly doesn’t feel right, a layout that isn’t working, a finish you regret, don’t stay silent. Just understand the cost implications and make changes intentionally, not impulsively.

Choose a Contractor Who Communicates Proactively

The right contractor anticipates change orders, then communicates about them early, and walks you through your options before you have to make a decision under pressure. Ask prospective contractors: “How do you handle unexpected conditions during a project?” Their answer will reveal their process and their character.

Change Order Red Flags vs. Green Flags

How you’re treated when a change order comes up reveals a lot about your contractor. Here’s what to watch for:

Red Flags to Watch For Green Flags to Celebrate
Verbal change approvals only — no written documentation All changes documented in writing before work proceeds
Vague change order descriptions with unclear pricing Itemized change orders with labor, materials, and timeline impact clearly broken out
Change orders presented after the work is already done Proactive communication before any scope change begins
Contractor discourages questions about the change Contractor explains the reason and walks you through options
Multiple surprise change orders on straightforward scopes Thorough upfront planning that anticipates and minimizes changes

 

How Building While Giving Handles Change Orders

At Building While Giving, we’ve built our entire process around transparency and respect for your investment. Here’s our commitment to you when it comes to change orders:

•  We invest heavily in pre-construction planning so that surprises are rare

•  When an unexpected condition arises, we document it immediately and walk you through your options before we touch anything.

•  Every change order we issue includes a detailed description, exact pricing, and timeline impact, in writing, through our JobTread client portal.

•  We never proceed with out-of-scope work without your signed approval.

•  We proactively flag known risk areas before construction begins, so your contingency budget is sized appropriately.

Because here’s what we know to be true: a homeowner who feels informed and respected becomes a partner in the project, not an adversary. And great partnerships produce great homes.

Questions to Ask Your Contractor Before You Sign

Before committing to any contractor for your Denver kitchen remodel, bathroom renovation, basement finish, or whole-home project, arm yourself with these questions:

•  “How do you document and communicate change orders?”

•  “Will I receive written change orders before any out-of-scope work begins?”

•  “Based on what you’ve seen in my home, what are the most likely unknowns that could trigger changes?”

•  “How are your material allowances set, are they based on current Denver market pricing?”

•  “What’s your process if I want to make a change mid-project?”

•  “Can I see examples of how you’ve handled change orders for past clients?”

A contractor who answers these questions with clarity and confidence is one you can trust with your home.

The Bigger Picture: Building with Purpose

At Building While Giving, we believe your home renovation is about more than square footage and finishes. It’s about creating a space that feels right for you and your family, while contributing to something larger than yourselves.

A portion of every project we complete goes toward supporting families and communities in need. So when you invest in your home through us, you’re also investing in the world around you.

That mission starts with trust. And trust starts with transparency, including how we handle the uncomfortable stuff like change orders.

Ready to Remodel Without the Surprises?

If you’re planning a kitchen remodel, bathroom renovation, basement finish, ADU, or whole-home project in the Denver metro area, let’s build it the right way from day one.

Schedule your free consultation at buildingwhilegiving.com/contact-us. We’ll walk your space, discuss your vision, and show you exactly how we plan, price, and communicate, so there are no surprises, only transformations.

Transform your home into a space that feels good to come back to every day and make a difference while you do it.

Building While Giving | 2859 S Locust St, Denver, CO 80222 | (720) 968-7874 | buildingwhilegiving.com

BuildingWhileGiving_HoodieBack_PRINT

Transform your home into a space that feels good to come back to every day.